• Facebook
  • ins
  • twitter
  • youtube
  • instagram-fill

431 stainless steel coil, 431 stainless steel strip, 431 stainless steel round bar supplier

Short Description:

431 stainless steels are martensitic, heat-treatable grades with excellent corrosion resistance, torque strength, high toughness and tensile properties. All these properties make them ideal for bolt and shaft applications. These steels, however, cannot be cold-worked owing to their high yield strength, hence they are suitable for operations such as spinning, deep drawing, bending or cold heading.
Fabrication of martensitic steels is generally carried out using techniques that allow hardening and tempering treatments and poor weldability. The corrosion resistance properties of grade 431 steels are lower than that of austenitic grades. The operations of grade 431 are limited by their loss of strength at high temperatures, due to over-tempering, and loss of ductility at negative temperatures.


Product Detail

Product Tags

Applications

This alloy is used for forged aircraft fasteners and fittings and should be considered for structural parts in marine atmospheres.
Type 431 is used in highly-stressed aircraft components, fasteners, bomb racks, bolting, pump shafts and valve stems. It is suitable for applications requiring a combination of corrosion resistance, hardness and toughness from –100/1200ºF (-70/650ºC.)
Typical applications of grade 431 stainless steels include the following:
▪ Laboratory equipment
▪ Marine systems
▪ Beater bars
▪ Pump and propeller shafts
▪ Nuts and bolts

Chemical Composition

Grade S C Cr Mn Ni Si P
430 0.03 max 0.12 max 16.00-18.00 1.00 max 0.75 1.00 0.04 max
430F 0.15 max 0.12 max 16.00-18.00 1.25 max   1.00 max 0.06 max

Mechanical Properties

Grades Elongation Tensile Strength Hardness Rockwell B Yield Strength Hardness Brinell
SS 430 22 450 89 205 183
430F 25 552 - 379 262

Available Sizes And Specifications

431 stainless steel strip sizes and specifications
Grade 431
Cold rolled stainless steel strip Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,
Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip Thickness: 3.0mm - 16mm, Width: 10mm - 900mm
Surface: No.1/pickling
Stainless steel foil Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,  BS 1449, DN17441, G4305

 

431 stainless steel coil sizes and specifications
Grade 431
Cold rolled stainless steel coil Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mm
Surface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,   BS 1449, DN17441, G4305
431 stainless steel pipe sizes and specifications
Grade 431
Stainless steel seamless pipe Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668
Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·
European Standard: EN10216-5, EN10216-2
Japanese Standard: JIS G3463-2006, JISG3459-2012
Russian Standard: GOST 9941-81;
431 stainless steel profile sizes and specifications
Grade 431
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar Diameter: 2mm - 600mm
Stainless steel bright Bar Diameter: 2mm - 600mm
Stainless steel hex Bar Dimension: 6mm - 80mm
Stainless steel square bar Dimension: 3.0 - 180mm
Stainless steel flat bar Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar as requirements
Length Normally 6m, or produce as requirements
Surface Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements
431 stainless steel plate sizes and specifications
Grade 431
Cold rolled stainless steel plate Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mm

Length: as requirements, Surface: No.1/pickling

Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,
BS 1449, DN17441, G4305
Stainless steel plate Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mm
Length: as requirements, Surface: No.1/pickling

  • Previous:
  • Next:

  • Related Products